폴리이미드-실리카 하이브리드막의 제조와 기체투과특성
(주)코리아스칼라
- 최초 등록일
- 2016.04.02
- 최종 저작일
- 2001.09
- 8페이지/ 어도비 PDF
- 가격 4,000원
* 본 문서는 배포용으로 복사 및 편집이 불가합니다.
서지정보
ㆍ발행기관 : 한국막학회
ㆍ수록지정보 : 멤브레인 / 11권 / 3호
ㆍ저자명 : 염승호, 정용수, 이우태, 김선일, 김진환
한국어 초록
Polyimide-silica 하이브리드막을 제조하고 silica 함량이 막의 구조적 특성과 기체의 투과특성에 미치는 영향을 연구하였다. 하이브리드막은 N,N`-dimethyl acetamide(DMAc) 용매 속에서 1,2,4,5-benzenetetracarboxylicdianhydride(PMDA)와 4,4`-diaminodiphenyl oxide(ODA) 및 tetraethyoxysilane(TEOS)를 출발물질로 하여 졸-겔 공정으로 제조하였다. 제조한 막은 FT-IR, EDX, TGA 및 SEM에 의하여 구조적 특성을 분석하고, 25℃에서 N2, O2, H2, CO2 및 CH4 기체에 대한 투과특성을 조사하였다. 하이브리드막은 높은 열적 안정성을 나타내었으며, polymide matrix에 silica입자가 균일하게 분포되어 있었고 silica 함량이 증가할수록 silica 입자의 크기가 증가하였다. 기체의 투과도계수는 silica 함량이 증가할수록 증가하였으나, 확산계수는 silica 함량에 무관하게 거의 일정하였다. 따라서 하이브리드막에 의한 투과도계수의 증가는 용해도계수가 증가하기 때문으로 생각되었다. 이들 기체에 대한 투과도계사구 증가함에도 불구하고, H2/N2, H2/O2와 H2/CO2의 선택도가 증가하였다.
영어 초록
Polyimide-silica hybrid membranes were prepared and the effect of silica content on the structural properties and the gas transport properties was studied. The hybrid membranes were obtained by the sol-gel process starting from 1,2,4,5-benzenetetracarboxylic dianhydride(PMDA), 4,4`-diamino- diphenyl oxide(ODA) and tetraethoxysilane(TEOS) in N,N` dimethylacetatmide (DMAc) solvent. The structural characterizations of the membrane were performed by FT-IR, EDX, TGA and SEM. The gas permeation experiments with N2, O2, H2, CO2and CH4 were carried out at the temperature of 25℃ and in the range of pressure from 3atm to 7atm. the hybrid membranes showed higher thermal stability than PI membranes. The silica patricles were uniformly embedded in the polyimide matrix and the size of silica particles increased with increasing silica content. The permeability coefficients of N2, O2, H2, CO2and CH4 increased with increasing silica content but the diffusion coefficients might appear to be a result of a solubility enhancement. In spite of the permeability enhancement, an increase in the selectivities of H2/N2, H2/O2 and H2/CO2 was observed.
참고 자료
없음