막접촉기 응용을 위한 직접 불소화를 통한 막의 표면개질
* 본 문서는 배포용으로 복사 및 편집이 불가합니다.
서지정보
ㆍ발행기관 : 한국막학회
ㆍ수록지정보 : 멤브레인 / 17권 / 4호
ㆍ저자명 : 이형근, 박보령, 임지원, 이상윤, 황택성
ㆍ저자명 : 이형근, 박보령, 임지원, 이상윤, 황택성
한국어 초록
본 연구에서는 선택적 Gas-Liquid Contactor의 성능을 향상시키기 위하여 polyethersulfone(PES), polysulfone(PSf), polyvinylidenefluoride (PVDF) 등의 막에 F2 gas를 이용하여 표면개질하였다. 표면개질된 막의 특성을 알아보기 위해 SEM, 표면접촉각, XPS, 물 투과 최소 압력 실험을 수행하였다. SEM 측정으로부터 막의 표면형태를 살펴본 결과 불소처리 시간이 증가함에 따라 막 표면의 roughness가 증가함을 알 수 있었다. 표면불소화한 막 표면에 -CF2, -CF3의 perfluoro group이 화학적으로 결합되어 막의 소수성이 증가된 것으로 나타났다. 또한 표면접촉각 및 물 투과 최소 압력 실험으로부터 표면불소화 처리시간이 증가함에 따라 측정값이 증가하여 막의 특성이 향상됨을 알 수 있었다.영어 초록
In this research, by using the fluorine gas, the poly(ether sulfone) (PES), the polysulfone (PSf), and the poly-vinylidenefluoride (PVDF) membranes were modified to improve the performance of the optional Gas-Liquid Contactor The SEM, surface contact angle, XPS, and the water transmission minimum pressure test was performed in order to examine the characteristics of which is surface modified. As a result of looking into the surface morphology of from the SEM measurement, we could know that the roughness of the membrane surface increased as the fluorine processing time increased. -CH2, and the perfluoro group of -CH3 were chemically combined with the surface fluorine conversion film surface and the hydrophobicity was exposed to be increased. Moreover, we could know that as the surface fluorinated processing time increased from the surface contact angle and water transmission minimum pressure test, the measured value increased and the overall characteristics were improved.참고 자료
없음"멤브레인"의 다른 논문
- 역삼투용 Cellulose Triacetate 막의 제조와 특성10페이지
- 소수성 폴리이미드공중합체 막에 의한 저농도 톨루엔함유 수용액의 투과증발분리7페이지
- 스티렌 유도체를 이용한 비불소계 고분자 전해질막의 산화적 안정성 개선8페이지
- 순환식 고분자 분리막 접촉기를 이용한 이산화황 분리9페이지
- 폴리머 블렌딩을 이용한 수소 전도성 가교형 막의 제조와 그 특성7페이지
- 공정압 변화에 따른 중공사막의 투과플럭스 특성11페이지
- 폴리에테르술폰 정밀여과막의 제조 및 특성 연구9페이지
- 전자선 가속기에 의해 방사선 처리한 양이온교환막을 이용한 전해-전기투석에 의한 HIx용액으로부터 H..7페이지
- 비다공성 분리막을 이용한 수용액 내 용존 산소 조절7페이지
- Poly(vinylidene fluoride-hexafluoropropylene)를 이용한 이차전지..10페이지