도로의 축광차선 도료 개발을 위한 축광안료 최적 배합비 산정에 관한 연구
* 본 문서는 배포용으로 복사 및 편집이 불가합니다.
서지정보
ㆍ발행기관 : 한국도로학회
ㆍ수록지정보 : 한국도로학회논문집 / 17권 / 5호
ㆍ저자명 : 이용문, 김상태, 김흥래
ㆍ저자명 : 이용문, 김상태, 김흥래
영어 초록
PURPOSES : This study was conducted to derive the optimum mixing ratio of phosphorescent pigment for the development of phosphorescent line marking.METHODS: In this study, we utilized a literature review and case study methodology, to describe the domestic and foreign state of practice for the production and mixing of phosphorescent pigment for use in line marking. The optimal mixing ratio was derived by comparing the reduction in luminance over time for the various phosphorescent pigment mixing ratios identified in the literature. In addition, performance and construction characteristics were analyzed using field testing techniques.
RESULTS : The results were as follows: 1) the results of the luminance performance standards tests showed that all of the phosphorescence test specimens satisfied the phosphorescent fire protection standard. As the phosphorescent pigment mixing ratio increased, the luminance value increased, 2) the luminance reduction rate was minimum at the mixing ratio of 50%. However, when compared to a mixing ratio 40%, a small difference was recorded, the luminance reduction rate from the mixing ratio of 40% is judged as being converged. Therefore, in view of the economic efficiency, it was determined that the optimal mixing ratio was 40%, 3) as a result of construction on the field, a mixing ratio of 40% was found to have a higher luminance value than the general line marking for up to three hours after sunset, 4) it was found that the phosphorescent line markings without glass beads spraying had a higher luminance value than the phosphorescent line markings with glass beads spraying.
CONCLUSIONS : Through the results of the basic experiments of the line markings obtained by blending a phosphorescent pigment, the results could be applied to play an important role in the development of phosphorescent line marking paint technology and in establishing application planning for on-site construction characteristics.
참고 자료
없음태그
이 자료와 함께 구매한 자료
"한국도로학회논문집"의 다른 논문
- 고속도로의 용량산정 방법론 개발에 관한 연구11페이지
- 도로 기하구조와 탄소배출 저감의 연계성을 고려한 시케인 기하구조 조건의 개선에 관한 연구8페이지
- 회전교차로 형태별 운영 및 안전성 평가에 관한 연구9페이지
- 신호교차로의 차로 배정과 신호시간 최적화 모형에 관한 연구11페이지
- 계획행동이론을 통한 과속운전 성향분석에 관한 연구10페이지
- 차량 주행 특성을 이용한 지도 매칭에 대한 연구8페이지
- 퍼지집합이론을 이용한 야간 도로 시인성 평가10페이지
- 도로곡선반경에 따른 가변전광표지의 교통안전효과 분석10페이지
- 도시 및 지방 회전교차로 사고 발생 모형8페이지
- 콘크리트 구조물에서의 열전모듈 거동에 관한 기초연구6페이지