Determination of Heavy metals on the non-woven in wet wipes using ICP-MS

서지정보

ㆍ발행기관 : 한국유화학회 ㆍ수록지정보 : 韓國油化學會誌 / 33권 / 1호
ㆍ저자명 : Sung-Min Choi, Jin-Kun Song, Sang-Jin Kim

목차

1. Introduction
2. Materials and Methods
2.1. Materials
2.2. Sample Preparation
2.3 Instrumentation
2.4. Standard Solutions and Reagents
2.5 Calibration Curve
2.6. LOD and LOQ
3. Results and Discussions
4. Conclusion
Acknowledgement
References

영어 초록

Heavy metals have been analyzed on the non-woven from the 24 kinds of wet wipes and 8 kinds of mask packs. The following materials used in the non-woven according to each product are: rayon+polyester for the 12 wet wipe products, rayon+PET for the 5 wet wipe products, and rayon, cotton, rayon+polyester+cotton, pulp+polypropylene for the rest of the wet wipe products. No further information on the materials was found on the 3 wet wipes and 8 mask packs. However, polyester may be applied for the non-woven in wet wipes, because PET is part of the polyester group. The heavy metals analysis in the 24 kinds of wet wipes and 8 kinds of mask packs revealed the following: arsenic was found from 47.14±1.13 to 71.75±1.64 ㎍/L on the 3 products, the amount of nickel in the 2 products were 261.26±5.14 and 1,242.63±43.71 ㎍ /L, 53.69±1.45 and 103.52±2.02 ㎍/L on the 2 mask packs. It was also revealed that lead was detected from 7.23±0.32 to 55.67±1.46 ㎍/L on the 6 wet wipes, antimony was ranged from 187.86±5.24 to 19,558.35±3,537.30 ㎍/L on the 12 wet wipes, and 5.25±0.25 and 8,936±55.22 ㎍/L on the 2 mask packs. No cadmium, mercury, or thallium were detected from all the products. A high concentration of antimony might come from antimony trioxide, which was used as a catalyst when manufacturing the polyester. Therefore, it is strongly recommended that a non-woven used for cosmetic purposes should not use heavy metals as a catalyst when manufacturing, and it’s important to clarify which materials are used in non-woven.

참고 자료

없음