고강도 PSC 휨부재의 비선형 모멘트-곡률 관계와 전산구조해석
* 본 문서는 배포용으로 복사 및 편집이 불가합니다.
서지정보
ㆍ발행기관 : 한국전산구조공학회
ㆍ수록지정보 : 한국전산구조공학회 논문집 / 15권 / 1호
ㆍ저자명 : 연정흠, 이제일
ㆍ저자명 : 연정흠, 이제일
한국어 초록
고강도 PSC 콘크리트 휨부재의 비선형 수치해석을 위해 적층법과 설계기준에 의한 비선형 모멘트 -곡률 관계의 계산방법이 제안되었다. 제안된 수치해석에 의한 모멘트-곡률 관계와 처짐계산을 위한 비선형 수치해석 과정에 의한 계산결과는 해석적인 방법에 의한 모멘트-곡률 관계 그리고 기존의 고강도 PSC 콘크리트 휨부재에 대한 실험결과와 비교되었다. 이 논문의 적층법에 의한 에너지흡수율은 강도설계법과 CEB-FIP 제안식보다 약 30%크게 계산되었다. 적층법에 의한 극한하중과 외부일은 각각 실험결과의 92%와 85%로 안전하게 계산되었으며, 강도설계법은 97%와 122%로 극한하중에 대해서는 안전하나 외부일은 과대 평가되었다. CEB-FIP 제안식은 극한하중과 외부일에서 실험결과의 113% 와 173%로 고강도 콘크리트에 대한 극한변형률 0.0035의 적용에 문제가 있었다 제안된 비선형 수치해석 과정은 고강도 PS 콘크리트 휨부재의 거동을 극한상태까지 안정적으로 해석할 수 있었으며, 극한하중의 80%가지 하중-처짐 관계와 균열의 전파정도의 계산결과는 실험결과와 유사하였다영어 초록
A methods to calculate non-linear moment-curvature relations of high-strength PSC flexural members for numerical analysis has been proposed. The moment-curvature relations were calculated with assumptions of design codes and by the layer method. The results of the proposed procedures for moment-curvature relations and numerical analysis were compared with those of pre-existing tests. The absorption energy rate of the design codes was about 30% larger than that of the layer method. The ultimate load and the external work of the layer method were 90% and 85% of those of tests, respectively The ultimate load of the strength design method was 97% of that of tests, but the external work was over-estimated with 122%. The ultimate load and external work by the proposed equation of the CEB-FIP Model Code were 113% and 173% of those of tests, respectively. It show that the use of ultimate strain of 0.0035 should be over-estimated for high-strength concrete. The procedure of non-linear numerical analysis of this research could be stably simulated the behavior of concrete flexural members until the ultimate state, and calculate results of the load-deflection relation and cracking pattern were very similar with those of tests.참고 자료
없음태그
"한국전산구조공학회 논문집"의 다른 논문
크로소이드 완화곡선을 갖는 수평 곡선보의 자유진동7페이지
바닥판 진동해석을 위한 보행하중의 모형화16페이지
강구조물 지지부의 강성도가 구조물 거동에 미치는 영향8페이지
마멸율에 관한 저널베어링의 최적설계10페이지
배플개수 및 내경변화에 따른 액체 저장탱크의 동억제 효과8페이지
복합재료 원통쉘의 구조해석을 이용한 신경회로망의 하중특성 추론에 관한 연구10페이지
제한된 모드형상을 이용한 개선된 손상평가 알고리즘10페이지
횡비틀림좌굴을 고려하는 2차 소성힌지해석을 이용한 3차원 강뼈대 구조물 설케10페이지
P- 효과를 고려한 RC 기둥의 극한저항력 산정12페이지
Bubble Mesh기법을 이용한 적응적 EFG해석10페이지