불소계면활성제를 함유한 초친수 코팅액의 제조 및 방담 방오 특성
* 본 문서는 배포용으로 복사 및 편집이 불가합니다.
서지정보
ㆍ발행기관 : 한국유화학회
ㆍ수록지정보 : 韓國油化學會誌 / 34권 / 3호
ㆍ저자명 : 이 수, 임선문, 황 헌
ㆍ저자명 : 이 수, 임선문, 황 헌
한국어 초록
내열성이 우수하며, 태양광 모듈의 유리 표면에 방담성(antifogging) 및 방오성(antifouling) 을 동시에 부여하여 효율을 향상시키기 위한 친수성 코팅액을 제조하기 위해 초친수성과 우수한 방담효 과를 나타내는 Tween 20과 데카플루오로부탄과 폴리에틸렌글리콜 성분으로 구성된 불소계면활성제 수 용액에 방오성 부여를 위하여 나노실리카를 분산하였다. 고온 처리에서 나노실리카의 함량에 따른 방담 효과는 모든 코팅액이 우수하였으나, 방오 효과는 나노실리카의 함량이 6 wt%일 때부터 나타났다. 불소 계면활성제의 함량이 증가할수록 초기 접촉각이 증가하며 방담 효과도 500회 wiping까지 잘 유지되었 다. 방오 효과 역시 불소계면활성제의 함량에 상관없이 우수하여 불소계면활성제의 적절한 첨가량은 0.1 wt%이상 이면 충분하였다. AFM 결과로부터 불소계면활성제가 0.1 wt%에서 0.3 wt%가 첨가된 경우 코팅 표면의 프랙탈구조가 확실히 나타나 방오성 향상에 기여하였다. 코팅된 유리의 투과도는 불소계면 활성제가 0.1 wt% 첨가된 TL-1의 경우가 가장 높았으며 더 많은 양의 불소계면활성제를 첨가할 경우 오히려 투과도 향상은 미미하였다. 이러한 결과는 앞의 AFM 결과에서 나타난 표면 조도가 높으며 프랙 탈구조 형성도 잘 일어난 TL-1 코팅액의 결과와 잘 일치하는 것이다.영어 초록
In order to produce hydrophilic coating solution, which has superior antifogging and antifouling effect on the glass surface of solar cell module as well as improving photovoltaic efficiency, nanosilica was dispersed in an aqueous solution of Tween 20 and fluorosurfactant composed of decafluorobutane and polyethylene glycol. The antifogging effect at high temperature was excellent for all the coating solutions containing nanosilica, but the antifouling effect was observed when the content of nanosilica was over 6 wt%. As the content of fluorosurfactant increased, the initial water contact angle slightly increased and the antifogging effect remained well until 500 wiping with wet WipeolⓇ. The antifouling effect was also excellent regardless of the content of fluorosurfactant, thus 0.1 wt% of the fluorosurfactant was enough for a coating solution production. From the AFM results, when 0.1 wt% to 0.3 wt% of the fluoro surfactant was added, the fractal structure of the coated glass surface was clearly existed and contributed to the better antifouling effect. The transmittance of coated glass surface was highest in TL-1 coating solution containing 0.1 wt% of fluorosurfactant, and the addition of fluorosurfactant in a larger amount than 0.1 wt% did not improve the transmittance. This result is in good agreement with the previous AFM result which shows a high surface roughness as well as a fractal structure formation for the TL-1 coating solution.참고 자료
없음태그
"韓國油化學會誌"의 다른 논문
- 시멘트공장 소성로 악취 배출특성10페이지
- 오계란 단백질 가수 분해물 제조 및 한외여과 분획물의 in vitro 항산화 활성 특성10페이지
- 고체 산 촉매를 이용한 고산가 음폐유의 에스테르화 반응 동역학 연구 및 반응 최적화11페이지
- 압착식, 압출식 착유 대마 종실유의 색깔과 주요성분 비교7페이지
- Preparation and Characterization of Hydrogels containin..7페이지
- 연근과 우절 에탄올 추출물의 향장효능 검증9페이지
- 단백질 분해효소를 이용한 오계란 가수분해물의 항산화 활성12페이지
- Polyethylene Glycol Acrylate를 이식 공중합 기반의 Poly Lactic Ac..7페이지
- 구기자 종자 초임계유체 추출물의 화장품소재로서의 가능성 평가8페이지
- 대사에너지가 열 스트레스에 노출된 오리의 간, 십이지장 융모, 미생물, 유전자 조절에 미치는 영향10페이지