공항 콘크리트 포장 구조해석을 위한 3차원 유한요소 모형 개발
* 본 문서는 배포용으로 복사 및 편집이 불가합니다.
서지정보
ㆍ발행기관 : 한국도로학회
ㆍ수록지정보 : 한국도로학회논문집 / 19권 / 6호
ㆍ저자명 : 박해원, 심차상, 임진선, 조남현, 정진훈
ㆍ저자명 : 박해원, 심차상, 임진선, 조남현, 정진훈
영어 초록
PURPOSES: In this study, a three-dimensional nonlinear finite element analysis (FEA) model for airport concrete pavement was developed using the commercial program ABAQUS. Users can select an analysis method and set the range of input parameters to reflect actual conditions such as environmental loading.METHODS : The geometrical shape of the FEA model was chosen by considering the concrete pavement located in the third-stage construction site of Incheon International Airport. Incompatible eight-node elements were used for the FEA model. Laboratory test results for the concrete specimens fabricated at the construction site were used as material properties of the concrete slab. The material properties of the cement-treated base suggested by the Federal Aviation Administration(FAA) manual were used as those of the lean concrete subbase. In addition, preceding studies and pavement evaluation reports of Incheon International Airport were referred for the material properties of asphalt base and subgrade. The kinetic friction coefficient between the concrete slab and asphalt base acquired from a preceding study was used for the friction coefficient between the layers. A nonlinear temperature gradient according to slab depth was used as an input parameter of environmental loading, and a quasistatic method was used to analyze traffic loading. The average load transfer efficiency obtained from an Heavy falling Weight Deflectomete(HWD) test was converted to a spring constant between adjacent slabs to be used as an input parameter. The reliability of the FEA model developed in this study was verified by comparing its analysis results to those of the FEAFAA model.RESULTS : A series of analyses were performed for environmental loading, traffic loading, and combined loading by using both the model developed in this study and the FEAFAA model under the same conditions. The stresses of the concrete slab obtained by both analysis models were almost the same. An HWD test was simulated and analyzed using the FEA model developed in this study. As a result, the actual deflections at the center, mid-edge, and corner of the slab caused by the HWD loading were similar to those obtained by the analysis.CONCLUSIONS : The FEA model developed in this study was judged to be utilized sufficiently in the prediction of behavior of airport concrete pavement.참고 자료
없음"한국도로학회논문집"의 다른 논문
산업단지 유형에 따른 교통사고 특성 비교 분석12페이지
자동차와 자전거 간 추월 최소요구 이격거리 추정 방법론 연구9페이지
확률기반 비신호교차로의 우회전 전용차로 설치 기준 정립8페이지
연속류 위험도로구간에서의 운전자의 도로속도규정 준수에 따른 온실가스 변화량 연구8페이지
조도 기반 자동차 전조등 시인 성능 평가 방법의 적정성 평가9페이지
도심부 도로 기능별 위계 재편에 관한 연구 : 부산광역시 서면 도심을 중심으로10페이지
연속류 도로구간의 수막정보 발생구간 추정 및 적용연구7페이지
드라이빙 시뮬레이터 주행과 현장주행시 운전자 반응 비교 연구7페이지
보통 포틀랜드 콘크리트 기반 교면포장 재료 성능 평가9페이지
도로함몰관리체계 구성요소 최적화방안 연구11페이지