Test-bed 콘크리트 구조물에 적용된 동적 가압 침투식 TiO2 고정화 기술의 NOx 제거효율 평가
* 본 문서는 배포용으로 복사 및 편집이 불가합니다.
서지정보
ㆍ발행기관 : 한국도로학회
ㆍ수록지정보 : 한국도로학회논문집 / 25권 / 2호
ㆍ저자명 : 김광현, 안희락, 이승우, 김영규
ㆍ저자명 : 김광현, 안희락, 이승우, 김영규
목차
ABSTRACT1. 서론
2. TiO2 콘크리트의 특성
2.1. TiO2의 질소산화물(NOx) 제거원리 및 특성
2.2. 국내·외 TiO2 적용 콘크리트 사례 및 특징
3. 질소산화물(NOx) 제거효율 평가 실험전략
3.1. Test bed 수직 콘크리트 구조물에 대한 TiO2고정화 방안 선정
3.2. Test bed 구축을 통한 질소산화물(NOx) 및일산화질소(NO) 제거효율 평가 실험전략
4. Test bed 수직 콘크리트 구조물의 동적 가압 침투식 TiO2 고정화 기술 적용에 따른 질소산화물(NOx) 및 일산화질소(NO) 제거효율 검토
5. 결론
REFERENCES
영어 초록
PURPOSES : Advancements in science and technology caused by industrialization have led to an increase in particulate matter emissions and, consequently, severity of air pollution. Nitrogen oxide (NOx), which accounts for 58% of road transport pollutants, adversely affects both human health and the environment. A test-bed was constructed to determine NOx removal efficiency at the roadside. TiO2, a material used to reduce particulate matter, was used to remove NOx. It was applied to a vertical concrete structure using the dynamic pressurized penetration TiO2 fixation method, which can be easily applied to vertical concrete structures. This study was conducted to evaluate the NOx removal efficiency of the dynamic pressurized-penetration TiO2 fixation method in a test-bed under real roadside conditions.METHODS : A test-bed was constructed in order to determine the NOx removal efficiency using the dynamic pressurized penetration TiO2 fixation method on the roadside. The dynamic pressurized-penetration TiO2 fixation method was applied by installing a vertical concrete structure. NOx was injected into the test-bed using an exhaust gas generator. By installing a shading screen, the photocatalytic reaction of TiO2 was suppressed to a maximum concentration of 1000 ppb along the roadside. The removal efficiency was evaluated by measuring NOx concentrations. In addition, illuminance was measured using an illuminance meter.
RESULTS : From the results of the analysis of the NOx removal efficiency in the test-bed which the dynamic pressurized type TiO2 fixation method was applied to, an average removal efficiency ranging from 18% to 40% was achieved, depending on the illuminance. Similarly, according to the results of the evaluation of the NO removal efficiency, an average of removal efficiency ranging from 20% to 62% was achieved. Thus, the NOx removal efficiency increased when the illuminance was high.
CONCLUSIONS : From the results of the experiment conducted, the efficiency of NOx removal per unit volume was obtained according to the illuminance of TiO2 concrete along an actual road. Field applicability of the dynamic pressurized-penetration-type TiO2 fixation method to vertical concrete structures along roads was confirmed.
참고 자료
없음태그
"한국도로학회논문집"의 다른 논문
사망 교통사고 결정요인 실증분석7페이지
지방자치단체 설치 옐로카펫 타입별 성능 비교11페이지
삼각교통섬 설치 여부별 교차로 사고 및 심각도 모형 개발10페이지
스마트카드와 택시 데이터를 활용한 교통 이동성 지표 개발9페이지
생존 분석을 활용한 서울시 도시고속도로 병목구간 혼잡발생 확률추정 연구8페이지
전라북도 특별교통수단 대기시간 감소방안 연구12페이지
교통흐름 상태별 적정 트램 우선신호운영 파라미터 설정 범위 연구7페이지
투수콘크리트를 도로기층재로 활용하기 위한 현장적용 실험연구8페이지
지역 특성에 따른 강원도 내 일반국도 아스팔트 포장의 평탄성 변화12페이지
도로 노면표시 국가 기준의 문제점 분석 및 개선방안 제안11페이지