GFRP 보강근 보의 휨부착 거동에 관한 실험 연구
(주)코리아스칼라
- 최초 등록일
- 2023.11.20
- 최종 저작일
- 2023.10
- 9페이지/ 어도비 PDF
- 가격 4,000원
* 본 문서는 배포용으로 복사 및 편집이 불가합니다.
서지정보
ㆍ발행기관 : 한국복합신소재구조학회
ㆍ수록지정보 : 복합신소재구조학회 논문집 / 14권 / 5호
ㆍ저자명 : 구종현, 배재호, 김상우, 김진섭
목차
1. 서 론
2. 실험 설계
2.1 시험체 설계
2.2 시험체 제작 및 실험 방법
3. 실험 결과
3.1 재료 실험 결과
3.2 시험체 실험 결과
4. 결 론
감사의 글
한국어 초록
본 연구에서는 GFRP(Glass Fiber Reinforced Polymer)를 주 보강근으로 사용하였으며, 정착길이가 없는 시험체를 제작 하여 4점 재하 휨시험을 수행하였다. 각 변수는 공칭지름이며 공칭지름 D13, D16, D19, 총 3가지의 변수로 이루어져있다. 휨 모 멘트는 공칭지름이 커질수록 약24.17%, 45.92% 강도가 증가하였으나 공칭 휨 강도를 고려하였을 때, 인장 강도와는 달리 공칭 지름에 비례하여 유사한 성능을 나타냄을 알 수 있었다. LVDT로 보강근과 콘크리트와의 부착성능을 확인하였고, 그 값은 매우 미미하며 거의 발생 되지 않은 것으로 판단된다. 또한 DIC로 시험체의 처짐을 확인하였으며, 실세 처짐 값과 유사함을 알 수 있었다.
영어 초록
In this study, we investigate the flexural bonding behavior of glass fiber reinforced polymer (GFRP) reinforced bars in a beam application. The GFRP reinforced bars were designed without end hooks. We fabricated beam specimens and subjected them to four-point bending tests. The parameter under consideration was the nominal diameter of the GFRP, with three different diameters: D13, D16, and D19. The results demonstrated a significant increase in the flexural strength of the beam when comparing D13 specimens to D16 and D19 specimens, with improvements of approximately 24.17% and 45.92%, respectively. This indicates that the strength of the specimens increases as the nominal diameter of the GFRP reinforcement increases. Notably, there was a proportional similarity in performance with respect to the nominal diameter in contrast to tensile strength.
참고 자료
없음